REN Shao-feng;WU Li-bo;WANG Da-long;LUO Xiong;TAO Ming;LI Qi-yue;LIU Kai;CHEN Zhong-qi;

• 1:Guizhou Fulin Mining Co.
• 2:LTD.
• 3:School of Resources and Safety Engineering
• 4:Central South University

Abstract：

Precise control of blasting-induced excavation boundaries in deep phosphate stopes presents significant challenges under complex backfill constraints,with current overbreak/underbreak evaluation methods frequently lacking quantitative rigor. Using the 875-level stope of Shaft No. 2 at Guizhou' s Xinqiao Phosphate Mine as a case study,this research develops an advanced methodology for blasting boundary characterization and control that leverages three-dimensional( 3D) laser point cloud data analysis. High-precision post-blast point cloud data were collected using a mobile laser scanning system,followed by the development of a comprehensive analytical framework incorporating point cloud denoising,preprocessing,registration correction,surface reconstruction,and geometric discrepancy analysis. This system allows quantitative evaluation of the spatial distribution of overbreak and underbreak,volumetric deviation,and the degree of contour matching between the excavation boundary and the design profile. Utilizing point cloud diagnostic results from representative stopes,the effects of blasting energy distribution and initiation sequence on boundary formation were analyzed,subsequently developing a control strategy integrating zoned millisecond-delay initiation with optimized blasthole layouts. Field trials at the 875-13# stope confirmed the method's capability to precisely characterize post-blast boundary morphology and deviation characteristics,achieving over 90% contour matching accuracy for both A_1 and A_2 rows. Volumetric difference analysis of point cloud data provided a reliable quantitative basis for assessing overbreak and underbreak and for guiding blasting parameter optimization. The developed boundary control technique demonstrates consistent stability and robustness even under challenging conditions,including drilling deviations in the A_3 and A_4 rows. This methodology offers a quantitative,traceable technical solution for precision blasting design and boundary control in deep mining stopes,delivering practical value by minimizing ore dilution and enhancing stope extraction efficiency.

Key Words： 3D laser point cloud;stope blasting;excavation boundary control;overbreak and underbreak evaluation;blasthole pattern optimization

Abstract:

Keywords:

Foundation: 国家自然科学基金面上项目(12472409)~~

Authors: REN Shao-feng;WU Li-bo;WANG Da-long;LUO Xiong;TAO Ming;LI Qi-yue;LIU Kai;CHEN Zhong-qi;

References：

• [1]高金石，张继春．爆破破岩机理动力分析[J]．金属矿山，1989(9):7-12,6.[1]GAO Jin-shi,ZHANG Ji-chun. Dynamic analysis of rockbreaking mechanism in blasting[J]. Metal Mines,1989(9):7-12,6.(in Chinese)
• [2]张理维，王卫华，戴怡文．基于岩石爆破损伤的炮孔布置优化研究[J]．爆破，2020,37(1):32-39.[2]ZHANG Li-wei,WANG Wei-hua,DAI Yi-wen. Research on optimizing drill hole arrangement based on rock blasting damage[J]. Blasting,2020,37(1):32-39.(in Chinese)
• [3]赵瑞，陶明，向恭梁，等．爆破引起的深埋岩石隧道动态应力集中和破坏特征[J]．中南大学学报(英文版)，2024,31(7):2321-2340.[3]ZHAO Rui,TAO Ming,XIANG Gong-liang,et al. Dynamic stress concentration and failure characteristics of deeply buried rock tunnels induced by blasting[J]. Journal of Central South University(English Edition),2024,31(7):2321-2340.(in Chinese)
• [4]傅师贵，刘泽功，张健玉，等．高地应力下岩体控制爆破机理与损伤演化特征研究[J]．采矿与安全工程学报，2024,41(4):867-878.[4]FU Shi-gui,LIU Ze-gong,ZHANG Jian-yu,et al. Study on mechanism and damage evolution characteristics of controlled blasting in rock masses under high ground stress[J]. Journal of Mining and Safety Engineering,2024,41(4):867-878.(in Chinese)
• [5]邹洋，李夕兵，周子龙，等．开挖扰动下高应力岩体的能量演化与应力重分布规律研究[J]．岩土工程学报，2012,34(9):1677-1684.[5]ZOU Yang,LI Xi-bing,ZHOU Zi-long,et al. Study on energy evolution and stress redistribution patterns in highstress rock masses under excavation disturbance[J].[J].Chinese Journal of Geotechnical Engineering,2012,34(9):1677-1684.(in Chinese)
• [6]左胜．超深孔爆破扩裂提高硬岩巷道机掘效能技术[J]．煤矿安全，2019,50(7):88-91,95.[6]ZUO Sheng. Technology for enhancing hard rock tunnel machine excavation efficiency via ultra-deep hole blasting expansion[J]. Coal Mine Safety,2019,50(7):88-91,95.(in Chinese)
• [7]宗琦，马亚东，汪海波，等．煤矿硬岩巷道掘进大直径炮孔爆破试验研究[J]．爆破，2017,34(1):47-51.[7]ZONG Qi,MA Ya-dong,WANG Hai-bo,et al. Experimental study on large-diameter blast holes for hard rock tunnel excavation in coal mines[J]. Blasting,2017,34(1):47-51.(in Chinese)
• [8]邵文琦，陈大勇，佟治，等．煤矿岩巷掘进技术现状及展望[J]．中国矿业，2024,33(11):192-205.[8]SHAO Wen-qi,CHEN Da-yong,TONG Zhi,et al. Current status and prospects of coal mine rock tunnel excavation technology[J]. China Mining,2024,33(11):192-205.(in Chinese)
• [9]姜立春，苏勇，代庆松．远场爆破水平应力波扰动下分层胶结充填体矿柱的动力响应机制[J]．岩石力学与工程学报，2020,39(1):34-44.[9]JIANG Li-chun,SU Yong,DAI Qing-song. Dynamic response mechanism of stratified grout-filled mine pillars under disturbance of far-field blasting horizontal stress waves[J]. Journal of Rock Mechanics and Engineering,2020,39(1):34-44.(in Chinese)
• [10]张召冉，杨仁树．岩石巷道“多阶段”掏槽技术及应用研究[J]．岩石力学与工程学报，2019,38(3):551-559.[10]ZHANG Zhao-ran,YANG Ren-shu. Research on“multistage”trenching technology and its application in rock tunnels[J]. Acta Mechanica et Technicae Terrae Sinicae,2019,38(3):551-559.(in Chinese)
• [11]王国法，庞义辉，任怀伟．智慧矿山技术体系研究与发展路径[J]．金属矿山，2022(5):1-9.[11]WANG Guo-fa,PANG Yi-hui,REN Hua-wei. Research and development pathways for smart mine technology systems[J]. Metal Mines,2022(5):1-9.(in Chinese)
• [12]廉旭刚，蔡音飞，胡海峰．我国矿山测量领域三维激光扫描技术的应用现状及存在问题[J]．金属矿山，2019(3):35-40.[12]LIAN Xu-gang,CAI Yin-fei,HU Hai-feng. Application status and existing issues of 3d laser scanning technology in china's mine surveying field[J]. Metal Mines,2019(3):35-40.(in Chinese)
• [13]闫冬，卢晓东．一种改进的高斯滤波方法[J]．地理空间信息，2018,16(5):113-114,122.[13]YAN Dong,LU Xiao-dong. An improved gaussian filtering method[J]. Geospatial Information,2018,16(5):113-114,122.(in Chinese)
• [14]霍佳欣，杨家志．统计学滤波和引导滤波相结合的点云数据降噪[J]．计算机应用与软件，2023,40(5):248-252,287.[14]HUO Jia-xin,YANG Jia-zhi. Noise reduction in point cloud data using combined statistical and guided filtering[J]. Computer Applications and Software,2023,40(5):248-252,287.(in Chinese)
• [15]廖中平，白慧鹏，陈立．基于双边滤波改进的点云平滑算法[J]．计算机技术与发展，2019,29(11):42-46.[15]LIAO Zhong-ping,BAI Hui-peng,CHEN Li. An improved point cloud smoothing algorithm based on bilateral filtering[J]. Computer Technology and Development,2019,29(11):42-46.(in Chinese)