TANG Wen-bo;HE Xiang-wen;MA Shu-zhi;WANG Zheng-yi-da;MAO Li;PENG Ze-jun;HUANG Chu-yuan;LIU Li-juan;CHEN Xian-feng;

• 1:School of Safety Science and Emergency Management
• 2:Wuhan University of Technology
• 3:China Nonferrous Metal Technology Co.
• 4:Ltd.

Abstract：

To investigate the explosion mechanism of molten aluminum-water interactions through computational fluid dynamics( CFD) simulations,a leakage scenario model was developed using the Volume of Fluid( VOF) multiphase approach to integrate water phase transition with coupled heat and mass transfer dynamics. The simulation successfully reproduced molten aluminum fragmentation during water entry and subsequent vapor explosion,and quantitatively analyzed fragmentation morphology,as well as explosion pressure and temperature distributions. Findings demonstrate that aluminum fragmentation results from the combined effects of hydrodynamic and thermodynamic interactions. Fragmentation significantly enlarges the interfacial contact area between molten aluminum and water,promoting rapid steam generation and subsequent vapor explosion. The detonation process follows a distinct sequential mechanism: “hydraulic dominant deformation-thermal driven fragmentation-steam explosion． ” Two pressure peaks were observed at the monitoring point,confirming that enhanced heat transfer due to fragmentation is a key factor in steam explosions. The temperature field evolution during molten aluminum-water interaction demonstrated distinct phase-dependent dynamic characteristics. This study systematically simulated the evolution of molten aluminum fragmentation upon contact with water and the subsequent steam explosion,providing fundamental theoretical insights and practical methodologies to improve safety protocols in aluminum production facilities.

Key Words： molten aluminum;steam explosion;VOF method;fragmentation characteristics;phase transition

Abstract:

Keywords:

Foundation: 国家自然科学基金(52274224);; 中铝国际重点科研项目(01032025017001);; 湖北省自然科学基金计划(创新群体项目)(2023AFA013)~~

Authors: TANG Wen-bo;HE Xiang-wen;MA Shu-zhi;WANG Zheng-yi-da;MAO Li;PENG Ze-jun;HUANG Chu-yuan;LIU Li-juan;CHEN Xian-feng;

References：

• [1]陈凌海，罗锐，王洲，等．两种不同类型FCI的机理对比研究[J]．核动力工程，2007(1):45-48.[1]CHEN Ling-hai,LUO Rui,WANG Zhou,et al. Comparative study on the mechanisms of two different types of FCI[J]. Nuclear Power Engineering,2007(1):45-48.(in Chinese)
• [2]周雅凡．高温熔融铝液遇水爆炸风险分析[D]．沈阳:东北大学，2020.[2]ZHOU Ya-fan. Risk analysis of explosions caused by hightemperature molten aluminum liquid contacting water[D]. Shenyang:Northeastern University,2020.(in Chinese)
• [3]沈正祥，陈虎，王杜，等．铸造工艺中蒸汽爆炸事故形成机制分析[J]．中国安全生产科学技术，2018,14(5):150-154.[3]SHEN Zheng-xiang,CHEN Hu,WANG Du,et al. Analysis of the formation mechanism of steam explosions in casting processes[J]. China Journal of Work Safety Science and Technology,2018,14(5):150-154.(in Chinese)
• [4]陈守辉，唐剑，陈向富，等．铝熔体半连续(深井)铸造爆炸事故的原因分析及防范措施[J]．铝加工，2022(5):67-72.[4]CHEN Shou-hui,TANG Jian,CHEN Xiang-fu,et al. Analysis of causes and preventive measures for explosions in semi-continuous(deep-well)casting of molten aluminum[J]. Aluminum Processing,2022(5):67-72.(in Chinese)
• [5]夏营．熔融物与冷却剂相互作用过程粗混合阶段的数值模拟分析[D]．北京:北京化工大学，2018.[5]XIA Ying. Numerical simulation analysis of the coarse mixing stage in the interaction process between molten materials and coolants[D]. Beijing:Beijing University of Chemical Technology,2018.(in Chinese)
• [6]KONG Ling-yu,LIU Xiao-zhen,SHI Zhong-ning,et al.Numerical simulation of liquid aluminum leakage in casting process[J]. Transactions of Nonferrous Metals Society of China,2021,31(1):297-305.
• [7]V A Bui,T N Dinh,B R Sehgal. Numerical simulation of surface instability phenomena associated with fuel-coolant interaction[C]∥Proceedings of the Eighth International Topical Meeting on Nuclear Reactor Thermal Hydraulics(NuRe TH-8),Kyoto,Japan,1997:639-646.
• [8]WEI Lin-kai,RENAUD M,ST PHANE P,et al. Analysis and sensitivity study of steam explosion loads[J]. Annals of Nuclear Energy,2023,194:110064.
• [9]王瑞金，张凯，王刚．FLUENT技术基础与实用实例[M]．北京:清华大学出版社，2007.[9]WANG Rui-jin,ZHANG Kai,WANG Gang. Fundamentals and practical applications of FLUENT technology[M].Beijing:Tsinghua University Press,2007.(in Chinese)
• [10]WANG Qiang,GOSSELIN L,FAFARD M,et al. Numerical investigation on the impact of anode change on heat transfer and fluid flow in aluminum smelting cells[J].Metallurgical and Materials Transactions,2016,47(2):1228-1236.
• [11]单梦琪．熔融金属与水接触相变换热与碎化特性研究[D]．常州:常州大学，2023.[11]SHAN Meng-qi. Study on phase change heat transfer and fragmentation characteristics of molten metal in contact with water[D]. Changzhou:Changzhou University,2023.(in Chinese)
• [12]Minsoo K,KWANG Hyun B. Numerical simulation of kelvin helmholtz instability and boundary layer stripping for an interpretation of melt jet breakup mechanisms[J]. Energies,2022,15(20):7517-7517.
• [13]段广涛，陈斌．一种适用于气泡运动模拟的半隐式粒子法[J]．工程热物理学报，2015,36(5):1019-1022.[13]DUAN Guang-tao,CHEN Bin. A semi-implicit particle method for bubble motion simulation[J]. Journal of Engineering Thermophysics,2015,36(5):1019-1022.(in Chinese)
• [14]李好婷，朱玉颖，孔德旭，等．多孔介质内颗粒流动特性及其对传热影响的模拟研究[J]．工程热物理学报，2021,42(8):2017-2026.[14]LI Hao-ting,ZHU Yu-ying,KONG De-xu,et al. Simulation study on particle flow characteristics in porous media and their influence on heat transfer[J]. Journal of Engineering Thermophysics,2021,42(8):2017-2026.(in Chinese)
• [15]LIU Tao,ZHOU Yuan,ZHONG Ming-jun,et al. A cfd modeling coupled with vof method and solidification model for molten jet breakup at low velocity[J]. Nuclear Science and Engineering,2023,197(3):398-412.
• [16]周宁，李雪，陈兵，等．高温熔融铝液与水接触爆炸过程实验研究[J]．实验力学，2021,36(1):114-122.[16]ZHOU Ning,LI Xue,CHEN Bing,et al. Experimental study on the explosion process of high-temperature molten aluminum liquid contacting water[J]. Experimental Mechanics,2021,36(1):114-122.(in Chinese)
• [17]SHEN Zheng-xiang,CHEN Hu,LV Zhong-jie,et al.Study on large-scale steam explosion of molten aluminum and water[J]. Process Safety Progress,2020,39(4):12149.
• [18]辛琦，吕中杰，冯杰，等．熔融铝液遇水碎化研究[J]．兵工学报，2014,35(S2):228-232.[18]XIN Qi,LV Zhong-jie,FENG Jie,et al. Study on the fragmentation of molten aluminum upon contact with water[J]. Journal of Ordnance Engineering,2014,35(S2):228-232.(in Chinese)